Pumps and Controllers

Artesian Drive® Controllers

Included items:

  • Factory-programmed variable speed drive unit
  • NEMA 1 enclosure
  • Pressure sensor, preset at 50 PSI
  • Sensor adjustment tool
  • 10′ (3 m) sensor cable


The maximum obtainable system pressure is limited by the performance of the pump installed.


Artesian Drive® is a line of custom-programmed Variable Speed Drives (VFD) that enhance the performance of standard centrifugal pumps. When applied correctly to 3 Ph motor-driven pumps, the Artesian Drive® eliminates pressure-cycling associated with conventional pressure-switch-controlled water pumping systems and provides a constant output pressure by increasing or decreasing motor speed, based upon demand.

Artesian Drive® is factory-programmed for our centrifugal pumps to provide optimum performance and motor protection. The Artesian Drive® can be used with other pump brands, provided the pump is powered by a 3 Ph motor that does not exceed the maximum current output rating of the drive.

  • Pre-programmed drives: no need for field technician to program the drive at the site
  • Drives are available for centrifugal pumps powered by a 3 Ph motor
  • Constant water pressure with a wide range of settings (30-80 PSI)*
  • Pressure is easily adjusted with a 7/32” (5.6 mm) allen wrench
  • Works with a small pressure tank or larger tank, already in place
  • No in-rush current at start-up
  • Soft start reduces mechanical/electrical stress, prolonging pump and motor life

Built-in protection and diagnostics:

  • Motor overload
  • Locked or bound pump – with auto-reversing torque
  • Low line voltage
  • Short circuit
  • High voltage/lightning protection
  • Dry run conditions, using intelligent load monitoring
  • Overheated drive with automatic reset


HERTZ: 60 Hz

MOTOR: 1 – 20 HP

VOLTAGE: Input: 230 V – Output: 0 – 230 V

PHASE: Input: 1 and 3 Phase; Output: 3 Phase