Climate Tanks™ Ancillaries

Rubber No Hub Couplings

In the 1960’s No-Hub Couplings were the next best plumbing innovation to hit the market and transformed cast iron drainage pipe installations. This happened just before plastic piping became available and acceptable in the plumbing industry and transformed the industry all over again. In this article we hope to provide you not only a brief history but also useful information regarding the versatility of no-hub couplings and their ability to be used for plastic piping as well.

SKU: N/A Category:

Description

The no-hub couplings were designed for cast iron they are also a very handy way to repair ABS or PVC. They can be especially helpful when the piping is in a hard to reach spot or the pipe is unable to be moved in either direction to allow the repair to be made with a solvent (glue-on) coupling. The pipe can be cut to remove the damaged area and a no-hub coupling can be installed along with the replacement piping.

ABS and PVC schedule 40 piping have a slightly larger overall outside diameter than cast iron pipe. There is not a significant difference when comparing the outside diameter of 1-1/2″ or 2″ cast iron to 1-1/2″ or 2″ ABS/PVC pipe. For these two smaller sizes you could use a no-hub coupling to connect ABS or PVC directly to cast iron piping without a problem. However, if you are using a no-hub coupling to connect 3″ or 4″ cast iron to ABS or PVC then you will notice a more defined difference between the outside diameters of the cast iron and the ABS or PVC pipe.

To make it easier to adapt ABS and PVC to cast iron, the ABS and PVC fitting manufacturers created the ABS and PVC No-Hub Adapter fitting. One side glues over ABS or PVC and the other side is the same size as no-hub cast iron pipe. Without the use of these special adapters, the inner gasket of a no-hub coupling will stretch too much and not provide the best seal possible. Note: ABS and PVC are not compatible to glue together so if you are using PVC then you will need a PVC No-Hub Adapter fitting, and if you are using ABS you will need an ABS No-Hub Adapter fitting.

Additional information

Rubber No Hub Couplings

2", 3", 4", 6", 8", 12"